نتائج "

vacuum system controller

": 135 المنتجات المكتشفة

مضخة فراغ جزيئية مقاومة لدرجة الحرارة العالية لصناعة زرع الأيونات

Turbo Molecular Pump , FF-160/620N , Anti-corrosion , Pumping 600L/s N2 The N-series turbo pumps are innovated on the basis of the conventional turbo pump. The main improvement is the nickel plating of the core components and the installation of the purging device, which make the N-series pumps are well suited for applications in corrosive environments. Advantages: 1 Anti corrosive plating 2 Stable performance 3 Long service life 　 Simple maintenance 4 Convenient operation 5

موثوقية عالية VAT صمامات فراغ محرك يدوي DN50 وزن خفيف

Gate Valve , CC-50B , Manual drive , DN50 , 1E+5 to 1E-7 Pa Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel with very low air bleeding

مضخة الفراغ التوربو عالية درجة الحرارة عملية مريحة FF-160/620E

Turbo Molecular Pump , FF-160/620E , Water cooling , Oil lubrication The oil lubrication turbo pumps are products of compact and high-performance developed by KYKY. The advantages of the oil lubrication turbo pumps are compact structure, convenient operation, flexible installation, wide application range and stable performance. Advantages: 1. Good performance under harsh environmental (high temperature, dust, etc.). 2. Stable performance and long service life 3. Simple

مضخة الفراغ الجزيئي لتبريد الهواء أداء مستقر لصناعة مصابيح

Turbo Molecular Pump , FF-160/700FE , Air cooling, Grease lubrication KYKY independently developed grease lubrication turbo pumps as a series of high-performance molecular pumps, The grease-lubrication pump is equipped with ceramic bearing, which is usually of a self-sealed structure, consisting of a bearing inner ring, a bearing outer ring, balls, holders, a sealing end cover and lubricating grease. Shafting support structure applied to the grease-lubricated ceramic bearing

مضخة الفراغ التوربوموليكولية لتشحيم الزيت FF-160/620E صيانة بسيطة

صمام الزاوية الفراغية الصمام الموثوق به محرك هوائي / Smc صمام الفراغ تسرب صغير

Angle Valve , Pneumatic , CDQ-Jb16, Flange KF/ CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of

صمام بوابة فراغ يدوي DN35 إشارة ميكانيكية E + 5 إلى 1E-7 Pa

Gate Valve , CC-35B , Manual Drive , DN35 , 1E+5-1E-7 Pa , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel with

صمام بوابة الفراغ الضوضاء الصغيرة DN63 1E+5 إلى 1E-7 نطاق التطبيقات ISO-F القياسية

Gate Valve , CC-63B, manual drive , DN63 , 1E+5 to 1E-7 , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, DN63, and application range is wide from 10E5 to 10E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel

صمام بوابة الفراغ ذو الحجم الصغير معدل نزيف الهواء المنخفض

Gate Valve , CC-100A , manual drive , DN100 , Mechanical indication , 1E+5-1E-7 Pa Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has DN 100 ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless

إشارة ميكانيكية لصمام بوابة الفراغ المستقر للمحرك اليدوي 1E+5 إلى 1E-7 Pa

Gate Valve , CC-250A , manual drive , 1E+5 to 1E-7 Pa , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has DN250 ISO- K, ISO-F and CF DN250 standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless

صمام زاوية الفراغ اليدوي KYKY KF فلانج CD-Jb40KF حياة طويلة

KYKY Manual Vacuum Angle Valve KF Flange CD-Jb40KF Long Service Life Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)

صمام زاوية فراغ فائقة 1E + 5 Pa - 1.3E-7 Pa نطاق التطبيق

Angle Valve , Manual , CD-Jb50C , CF Flange , Application :1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel

الوزن الخفيف صمام زاوية الفراغ DN25 KF أقل ارتداء ميكانيكي موافقة CE

Angle Valve , Manual , CD-Jb25KF , KF Flange , Air compression : 0.4 ～ 0.7MPa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel

الصمامات الفراغية الموثوقة القيادة الهوائية الهيكل المدمج

Angle Valve , Pneumatic , CDQ-Jb35C, Flange CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of welded

الصمام الزاوية الفراغ العالي طويل العمر الخدمي لقطع في أو قطع تدفق الغاز

Angle Valve , Pneumatic , CDQ-Jb160, Flange ISO-K/ CF , Leak rate ≤1.3×10-10 Pa.m3/s Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of

صمام زاوية فراغ صغير ذو حواف تعمل بالغازات غير المسببة للتآكل

Angle Valve , Manual , CD-Jb50KF, KF Flange , 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber),this

صمام الفراغ المهنية المضغوطة الرئوية CF فلنج لحام

Angle Valve , Manual , CD-Jb16C , CF Flange , welded bellow sealed Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)

دليل صمام زاوية فراغ CF شفة تسرب صغير أي موقف التركيب

Angle Valve , Manual , CD-Jb25C , CF Flange , Mounting position : Any Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)

صمام فراغ Smc الصناعي DN100 اللف ISO-K / CF وسائل العمل الهوائية

Angle Valve , Pneumatic , CDQ-Jb100, Flange ISO-K/ CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of

معدل تسرب ISO-K / CF ≤1.3 × 10-10 Pa.M3/S

Angle Valve , Pneumatic , CDQ-Jb63 , Flange ISO-K/ CF , Leak rate:≤1.3×10-10 Pa.m3/s Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of

السابقة

صفحة 4 من 7