Pompa a vuoto molecolare a prova di alta temperatura per l'industria dell'impianto ionico
Turbo Molecular Pump , FF-160/620N , Anti-corrosion , Pumping 600L/s N2 The N-series turbo pumps are innovated on the basis of the conventional turbo pump. The main improvement is the nickel plating of the core components and the installation of the purging device, which make the N-series pumps are well suited for applications in corrosive environments. Advantages: 1 Anti corrosive plating 2 Stable performance 3 Long service life Simple maintenance 4 Convenient operation 5
Valvole a vuoto ad alta affidabilità
Gate Valve , CC-50B , Manual drive , DN50 , 1E+5 to 1E-7 Pa Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel with very low air bleeding
Pompa a vuoto a turbo ad alta temperatura
Turbo Molecular Pump , FF-160/620E , Water cooling , Oil lubrication The oil lubrication turbo pumps are products of compact and high-performance developed by KYKY. The advantages of the oil lubrication turbo pumps are compact structure, convenient operation, flexible installation, wide application range and stable performance. Advantages: 1. Good performance under harsh environmental (high temperature, dust, etc.). 2. Stable performance and long service life 3. Simple
Funzionamento stabile della pompa a vuoto molecolare di raffreddamento dell'aria per l'industria della fabbricazione di lampade
Turbo Molecular Pump , FF-160/700FE , Air cooling, Grease lubrication KYKY independently developed grease lubrication turbo pumps as a series of high-performance molecular pumps, The grease-lubrication pump is equipped with ceramic bearing, which is usually of a self-sealed structure, consisting of a bearing inner ring, a bearing outer ring, balls, holders, a sealing end cover and lubricating grease. Shafting support structure applied to the grease-lubricated ceramic bearing
Pompa a vuoto turbomolecolare per lubrificazione dell'olio FF-160/620E Semplice manutenzione
Turbo Molecular Pump , FF-160/620E , Water cooling , Oil lubrication The oil lubrication turbo pumps are products of compact and high-performance developed by KYKY. The advantages of the oil lubrication turbo pumps are compact structure, convenient operation, flexible installation, wide application range and stable performance. Advantages: 1. Good performance under harsh environmental (high temperature, dust, etc.). 2. Stable performance and long service life 3. Simple
Piccola perdita dell'azionamento pneumatico della valvola ad angolo di vuoto della guarnizione affidabile/valvola del vuoto Smc
Angle Valve , Pneumatic , CDQ-Jb16, Flange KF/ CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
Valvola di apertura manuale DN35 Indicazione meccanica E+5 a 1E-7 Pa
Gate Valve , CC-35B , Manual Drive , DN35 , 1E+5-1E-7 Pa , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel with
Valvola di porta per vuoto a basso rumore DN63 1E+5 a 1E-7 Intervallo di applicazione Flanchetta standard ISO-F
Gate Valve , CC-63B, manual drive , DN63 , 1E+5 to 1E-7 , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, DN63, and application range is wide from 10E5 to 10E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel
Valvola a saracinesca per vuoto di piccolo volume Tasso di spurgo dell'aria estremamente basso Buona tenuta
Gate Valve , CC-100A , manual drive , DN100 , Mechanical indication , 1E+5-1E-7 Pa Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has DN 100 ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless
Valvola di porta a vuoto stabile Azionamento manuale Indicazione meccanica 1E+5 a 1E-7 Pa
Gate Valve , CC-250A , manual drive , 1E+5 to 1E-7 Pa , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has DN250 ISO- K, ISO-F and CF DN250 standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless
KYKY Valvola angolare a vuoto manuale KF Flange CD-Jb40KF
KYKY Manual Vacuum Angle Valve KF Flange CD-Jb40KF Long Service Life Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
Valvola d'angolo ad altissimo vuoto 1E+5 Pa - 1.3E-7 Pa
Angle Valve , Manual , CD-Jb50C , CF Flange , Application :1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel
Peso leggero Valvola angolare a vuoto DN25 KF meno usura meccanica Omologazione CE
Angle Valve , Manual , CD-Jb25KF , KF Flange , Air compression : 0.4 ～ 0.7MPa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel
Struttura compatta dell'azionamento pneumatico delle valvole per vuoto del tino con tenuta affidabile
Angle Valve , Pneumatic , CDQ-Jb35C, Flange CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of welded
Valvola ad angolo di vuoto elevato Flange lunga durata di servizio per il taglio in o tagliare il flusso di gas
Angle Valve , Pneumatic , CDQ-Jb160, Flange ISO-K/ CF , Leak rate ≤1.3×10-10 Pa.m3/s Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
Valvole angolari a vuoto di piccole dimensioni con flange di gas non corrosivi
Angle Valve , Manual , CD-Jb50KF, KF Flange , 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber),this
Valvola a vuoto pneumatica professionale CF Flange saldata a calce sigillata
Angle Valve , Manual , CD-Jb16C , CF Flange , welded bellow sealed Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
Valvola ad angolo per vuoto manuale Flangia CF Piccole perdite Qualsiasi posizione di montaggio
Angle Valve , Manual , CD-Jb25C , CF Flange , Mounting position : Any Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
Valvola per vuoto industriale SMC Flangia DN100 ISO-K/CF Supporti di lavoro dell'aria
Angle Valve , Pneumatic , CDQ-Jb100, Flange ISO-K/ CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
Flangia pneumatica della valvola angolare per vuoto ISO-K/CF Tasso di perdita ≤1,3×10-10 Pa.M3/S
Angle Valve , Pneumatic , CDQ-Jb63 , Flange ISO-K/ CF , Leak rate:≤1.3×10-10 Pa.m3/s Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
