উচ্চ তাপমাত্রা-প্রমাণ আণবিক ভ্যাকুয়াম পাম্প আইওন ইমপ্লান্টেশন শিল্পের জন্য
Turbo Molecular Pump , FF-160/620N , Anti-corrosion , Pumping 600L/s N2 The N-series turbo pumps are innovated on the basis of the conventional turbo pump. The main improvement is the nickel plating of the core components and the installation of the purging device, which make the N-series pumps are well suited for applications in corrosive environments. Advantages: 1 Anti corrosive plating 2 Stable performance 3 Long service life Simple maintenance 4 Convenient operation 5
উচ্চ নির্ভরযোগ্যতা ভ্যাট ভ্যাকুয়াম ভালভ ম্যানুয়াল ড্রাইভ DN50 হালকা ওজন
Gate Valve , CC-50B , Manual drive , DN50 , 1E+5 to 1E-7 Pa Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel with very low air bleeding
উচ্চ তাপমাত্রা টার্বো ভ্যাকুয়াম পাম্প সুবিধাজনক অপারেশন FF-160/620E
Turbo Molecular Pump , FF-160/620E , Water cooling , Oil lubrication The oil lubrication turbo pumps are products of compact and high-performance developed by KYKY. The advantages of the oil lubrication turbo pumps are compact structure, convenient operation, flexible installation, wide application range and stable performance. Advantages: 1. Good performance under harsh environmental (high temperature, dust, etc.). 2. Stable performance and long service life 3. Simple
বায়ু শীতল আণবিক ভ্যাকুয়াম পাম্প ল্যাম্প উত্পাদন শিল্পের জন্য স্থিতিশীল কর্মক্ষমতা
Turbo Molecular Pump , FF-160/700FE , Air cooling, Grease lubrication KYKY independently developed grease lubrication turbo pumps as a series of high-performance molecular pumps, The grease-lubrication pump is equipped with ceramic bearing, which is usually of a self-sealed structure, consisting of a bearing inner ring, a bearing outer ring, balls, holders, a sealing end cover and lubricating grease. Shafting support structure applied to the grease-lubricated ceramic bearing
তেল তৈলাক্তকরণ Turbomolecular ভ্যাকুয়াম পাম্প FF-160/620E সহজ রক্ষণাবেক্ষণ
Turbo Molecular Pump , FF-160/620E , Water cooling , Oil lubrication The oil lubrication turbo pumps are products of compact and high-performance developed by KYKY. The advantages of the oil lubrication turbo pumps are compact structure, convenient operation, flexible installation, wide application range and stable performance. Advantages: 1. Good performance under harsh environmental (high temperature, dust, etc.). 2. Stable performance and long service life 3. Simple
নির্ভরযোগ্য সীল ভ্যাকুয়াম অ্যাঙ্গেল ভালভ বায়ুসংক্রান্ত ড্রাইভ / Smc ভ্যাকুয়াম ভালভ ছোট ফুটো
Angle Valve , Pneumatic , CDQ-Jb16, Flange KF/ CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
ম্যানুয়াল ভ্যাকুয়াম গেট ভালভ DN35 যান্ত্রিক নির্দেশ E+5 থেকে 1E-7 Pa
Gate Valve , CC-35B , Manual Drive , DN35 , 1E+5-1E-7 Pa , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel with
ছোট গোলমাল ভ্যাকুয়াম গেট ভালভ DN63 1E+5 থেকে 1E-7 অ্যাপ্লিকেশন পরিসীমা আইএসও-এফ স্ট্যান্ডার্ড ফ্ল্যাঞ্জ
Gate Valve , CC-63B, manual drive , DN63 , 1E+5 to 1E-7 , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, DN63, and application range is wide from 10E5 to 10E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel
ছোট ভলিউম ভ্যাকুয়াম গেট ভালভ আল্ট্রা - নিম্ন বায়ু রক্তপাত হার ভাল সিলিং
Gate Valve , CC-100A , manual drive , DN100 , Mechanical indication , 1E+5-1E-7 Pa Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has DN 100 ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless
স্থিতিশীল ভ্যাকুয়াম গেট ভালভ ম্যানুয়াল ড্রাইভ যান্ত্রিক নির্দেশ 1E+5 থেকে 1E-7 Pa
Gate Valve , CC-250A , manual drive , 1E+5 to 1E-7 Pa , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has DN250 ISO- K, ISO-F and CF DN250 standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless
KYKY ম্যানুয়াল ভ্যাকুয়াম এঙ্গেল ভালভ KF ফ্ল্যাঞ্জ CD-Jb40KF দীর্ঘ সেবা জীবন
KYKY Manual Vacuum Angle Valve KF Flange CD-Jb40KF Long Service Life Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
আল্ট্রা হাই ভ্যাকুয়াম এঙ্গেল ভালভ 1E+5 Pa - 1.3E-7 Pa অ্যাপ্লিকেশন রেঞ্জ
Angle Valve , Manual , CD-Jb50C , CF Flange , Application :1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel
হালকা ওজন ভ্যাকুয়াম এঙ্গেল ভালভ DN25 KF কম যান্ত্রিক পরিধান সিই অনুমোদিত
Angle Valve , Manual , CD-Jb25KF , KF Flange , Air compression : 0.4 ～ 0.7MPa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel
নির্ভরযোগ্য সিল ভ্যাট ভ্যাকুয়াম ভালভ বায়ুসংক্রান্ত ড্রাইভ কম্প্যাক্ট গঠন
Angle Valve , Pneumatic , CDQ-Jb35C, Flange CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of welded
উচ্চ ভ্যাকুয়াম এঙ্গেল ভ্যালভ ফ্ল্যাঞ্জ দীর্ঘ সেবা জীবন কাটা-ইন বা গ্যাস প্রবাহ বন্ধ
Angle Valve , Pneumatic , CDQ-Jb160, Flange ISO-K/ CF , Leak rate ≤1.3×10-10 Pa.m3/s Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
ছোট ভ্যাকুয়াম অ্যাঙ্গেল ভালভ ফ্ল্যাঞ্জড নন - ক্ষয়কারী গ্যাসগুলি কার্যকরী মিডিয়া
Angle Valve , Manual , CD-Jb50KF, KF Flange , 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber),this
পেশাদার বায়ুসংক্রান্ত ভ্যাকুয়াম ভালভ সিএফ ফ্ল্যাঞ্জ ঝালাই বেলো সিল
Angle Valve , Manual , CD-Jb16C , CF Flange , welded bellow sealed Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
ম্যানুয়াল ভ্যাকুয়াম অ্যাঙ্গেল ভালভ সিএফ ফ্ল্যাঞ্জ ছোট ফুটো যে কোনও মাউন্টিং অবস্থান
Angle Valve , Manual , CD-Jb25C , CF Flange , Mounting position : Any Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
ইন্ডাস্ট্রিয়াল এসএমসি ভ্যাকুয়াম ভালভ DN100 ফ্ল্যাঞ্জ আইএসও-কে/সিএফ এয়ার ওয়ার্কিং মিডিয়া
Angle Valve , Pneumatic , CDQ-Jb100, Flange ISO-K/ CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
নিউম্যাটিক ভ্যাকুয়াম এঙ্গেল ভ্যালভ ফ্ল্যাঞ্জ আইএসও-কে/সিএফ ফুটো হার ≤1.3×10-10 Pa.M3/S
Angle Valve , Pneumatic , CDQ-Jb63 , Flange ISO-K/ CF , Leak rate:≤1.3×10-10 Pa.m3/s Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
