Hoogtemperatuur-proof moleculaire vacuümpomp voor de ionenimplantatie-industrie
Turbo Molecular Pump , FF-160/620N , Anti-corrosion , Pumping 600L/s N2 The N-series turbo pumps are innovated on the basis of the conventional turbo pump. The main improvement is the nickel plating of the core components and the installation of the purging device, which make the N-series pumps are well suited for applications in corrosive environments. Advantages: 1 Anti corrosive plating 2 Stable performance 3 Long service life Simple maintenance 4 Convenient operation 5
Hoge betrouwbaarheid Vat Vacuum Valves Manual Drive DN50 Lichtgewicht
Gate Valve , CC-50B , Manual drive , DN50 , 1E+5 to 1E-7 Pa Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel with very low air bleeding
Turbovacuümpomp op hoge temperatuur Handige bediening FF-160/620E
Turbo Molecular Pump , FF-160/620E , Water cooling , Oil lubrication The oil lubrication turbo pumps are products of compact and high-performance developed by KYKY. The advantages of the oil lubrication turbo pumps are compact structure, convenient operation, flexible installation, wide application range and stable performance. Advantages: 1. Good performance under harsh environmental (high temperature, dust, etc.). 2. Stable performance and long service life 3. Simple
Moleculaire vacuümpomp voor luchtkoeling Stabiele prestaties voor de lampindustrie
Turbo Molecular Pump , FF-160/700FE , Air cooling, Grease lubrication KYKY independently developed grease lubrication turbo pumps as a series of high-performance molecular pumps, The grease-lubrication pump is equipped with ceramic bearing, which is usually of a self-sealed structure, consisting of a bearing inner ring, a bearing outer ring, balls, holders, a sealing end cover and lubricating grease. Shafting support structure applied to the grease-lubricated ceramic bearing
Oliesmering Turbomoleculaire vacuümpomp FF-160/620E Eenvoudig onderhoud
Turbo Molecular Pump , FF-160/620E , Water cooling , Oil lubrication The oil lubrication turbo pumps are products of compact and high-performance developed by KYKY. The advantages of the oil lubrication turbo pumps are compact structure, convenient operation, flexible installation, wide application range and stable performance. Advantages: 1. Good performance under harsh environmental (high temperature, dust, etc.). 2. Stable performance and long service life 3. Simple
Betrouwbare afdichting Vacuümhoekventiel Pneumatische aandrijving / Smc Vacuümventiel Klein lek
Angle Valve , Pneumatic , CDQ-Jb16, Flange KF/ CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
Handmatige vacuümschuifafsluiter DN35 Mechanische indicatie E+5 tot 1E-7 Pa
Gate Valve , CC-35B , Manual Drive , DN35 , 1E+5-1E-7 Pa , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel with
Kleine geluidsvacuüm schuifafsluiter DN63 1E+5 tot 1E-7 Toepassingsgebied ISO-F standaardflens
Gate Valve , CC-63B, manual drive , DN63 , 1E+5 to 1E-7 , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, DN63, and application range is wide from 10E5 to 10E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel
Vacuümschuifafsluiter met klein volume Ultra - Lage luchtaftapsnelheid Goede afdichting
Gate Valve , CC-100A , manual drive , DN100 , Mechanical indication , 1E+5-1E-7 Pa Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has DN 100 ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless
Stabiele vacuümschuifafsluiter Handmatige aandrijving Mechanische indicatie 1E+5 tot 1E-7 Pa
Gate Valve , CC-250A , manual drive , 1E+5 to 1E-7 Pa , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has DN250 ISO- K, ISO-F and CF DN250 standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless
KYKY handmatig vacuümhoekventiel KF Flang CD-Jb40KF
KYKY Manual Vacuum Angle Valve KF Flange CD-Jb40KF Long Service Life Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
Ultra High Vacuum Angle Valve 1E+5 Pa - 1.3E-7 Pa Toepassingsbereik
Angle Valve , Manual , CD-Jb50C , CF Flange , Application :1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel
Lichtgewicht vacuümhoekventiel DN25 KF, minder mechanische slijtage, CE-goedgekeurd
Angle Valve , Manual , CD-Jb25KF , KF Flange , Air compression : 0.4 ～ 0.7MPa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel
Betrouwbare afdichting Vat Vacuümkleppen Pneumatische aandrijving Compacte structuur
Angle Valve , Pneumatic , CDQ-Jb35C, Flange CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of welded
Hoogvacuüm hoekventielflens Lange levensduur voor in- of uitschakelen van de gasstroom
Angle Valve , Pneumatic , CDQ-Jb160, Flange ISO-K/ CF , Leak rate ≤1.3×10-10 Pa.m3/s Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
Kleine vacuümhoekventiel met flenzen voor niet-corrosieve gassen
Angle Valve , Manual , CD-Jb50KF, KF Flange , 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber),this
Professionele pneumatische vacuümklep CF-flens gelaste balg afgedicht
Angle Valve , Manual , CD-Jb16C , CF Flange , welded bellow sealed Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
Handmatig vacuümhoekventiel CF-flens Kleine lekkage Elke montagepositie
Angle Valve , Manual , CD-Jb25C , CF Flange , Mounting position : Any Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
Industriële Smc-vacuümklep DN100 Flans ISO-K/CF
Angle Valve , Pneumatic , CDQ-Jb100, Flange ISO-K/ CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
Pneumatische vacuümhoekkleppenflens ISO-K/CF Leak Rate ≤1.3×10-10 Pa.M3/S
Angle Valve , Pneumatic , CDQ-Jb63 , Flange ISO-K/ CF , Leak rate:≤1.3×10-10 Pa.m3/s Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
