Υψηλή θερμοκρασία - απόδειξη μοριακής αντλίας κενού για βιομηχανία εμφύτευσης ιόντων
Turbo Molecular Pump , FF-160/620N , Anti-corrosion , Pumping 600L/s N2 The N-series turbo pumps are innovated on the basis of the conventional turbo pump. The main improvement is the nickel plating of the core components and the installation of the purging device, which make the N-series pumps are well suited for applications in corrosive environments. Advantages: 1 Anti corrosive plating 2 Stable performance 3 Long service life Simple maintenance 4 Convenient operation 5
Υψηλή αξιοπιστία βατ βαλβίδες κενού χειροκίνητη κίνηση DN50 ελαφρύ βάρος
Gate Valve , CC-50B , Manual drive , DN50 , 1E+5 to 1E-7 Pa Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel with very low air bleeding
Υψηλής θερμοκρασίας αντλία κενού τουρμπομηχανής Εύκολη λειτουργία FF-160/620E
Turbo Molecular Pump , FF-160/620E , Water cooling , Oil lubrication The oil lubrication turbo pumps are products of compact and high-performance developed by KYKY. The advantages of the oil lubrication turbo pumps are compact structure, convenient operation, flexible installation, wide application range and stable performance. Advantages: 1. Good performance under harsh environmental (high temperature, dust, etc.). 2. Stable performance and long service life 3. Simple
Αεροψύξη Μοριακή αντλία κενού Σταθερή απόδοση για τη βιομηχανία κατασκευής λαμπτήρων
Turbo Molecular Pump , FF-160/700FE , Air cooling, Grease lubrication KYKY independently developed grease lubrication turbo pumps as a series of high-performance molecular pumps, The grease-lubrication pump is equipped with ceramic bearing, which is usually of a self-sealed structure, consisting of a bearing inner ring, a bearing outer ring, balls, holders, a sealing end cover and lubricating grease. Shafting support structure applied to the grease-lubricated ceramic bearing
Ελαφρύς λιπαντικός αντλίας κενού FF-160/620E Απλή συντήρηση
Turbo Molecular Pump , FF-160/620E , Water cooling , Oil lubrication The oil lubrication turbo pumps are products of compact and high-performance developed by KYKY. The advantages of the oil lubrication turbo pumps are compact structure, convenient operation, flexible installation, wide application range and stable performance. Advantages: 1. Good performance under harsh environmental (high temperature, dust, etc.). 2. Stable performance and long service life 3. Simple
Αξιόπιστη σφραγίδα βαλβίδα κενού γωνίας Πνευματική κίνηση / Smc βαλβίδα κενού Μικρή διαρροή
Angle Valve , Pneumatic , CDQ-Jb16, Flange KF/ CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
Εγχειρίδιο βαλβίδας κενού DN35 Μηχανική ένδειξη E+5 έως 1E-7 Pa
Gate Valve , CC-35B , Manual Drive , DN35 , 1E+5-1E-7 Pa , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel with
Διάταξη εφαρμογής: ΔΕΝ63 1E+5 έως 1E-7
Gate Valve , CC-63B, manual drive , DN63 , 1E+5 to 1E-7 , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has ISO- K, ISO-F and CF standard Flange, DN63, and application range is wide from 10E5 to 10E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless steel
Μικρού όγκου βαλβίδα διακοπής κενού Ultra - χαμηλό ποσοστό αιμορραγίας αέρα Καλή σφράγιση
Gate Valve , CC-100A , manual drive , DN100 , Mechanical indication , 1E+5-1E-7 Pa Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has DN 100 ISO- K, ISO-F and CF standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless
Εγχειρίδιο κίνησης σταθερής βαρύτητας βαλβίδας πύλης μηχανική ένδειξη 1E+5 έως 1E-7 Pa
Gate Valve , CC-250A , manual drive , 1E+5 to 1E-7 Pa , Mechanical indication Updated type of Ultrahigh Vacuum Gate valve are ultra think type gate valves developed based on original valve, are applicable for ultrahigh vacuum. It has DN250 ISO- K, ISO-F and CF DN250 standard Flange, and application range is wide from 1E+5 to 1E-7 Pa. Exteranl surface of valve adopts silver grey matte finishing. Main parts and components such valve boday and plate are made of 304 stainless
KYKY χειροκίνητη βαλβίδα γωνίας κενού KF Flange CD-Jb40KF
KYKY Manual Vacuum Angle Valve KF Flange CD-Jb40KF Long Service Life Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
Ελκυστική βαλβίδα γωνίας υπερυψωμένου κενού 1E+5 Pa - 1.3E-7 Pa Πεδίο εφαρμογής
Angle Valve , Manual , CD-Jb50C , CF Flange , Application :1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel
Ελαφρύ βάρος Βαλβίδα γωνίας κενού DN25 KF Λιγότερη μηχανική φθορά Έγκριση CE
Angle Valve , Manual , CD-Jb25KF , KF Flange , Air compression : 0.4 ～ 0.7MPa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel
Αξιόπιστη σφραγίδα βατ βαλβίδες κενού Πνευματική κίνηση συμπαγή δομή
Angle Valve , Pneumatic , CDQ-Jb35C, Flange CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of welded
Υψηλής κενότητας γωνιακή βαλβίδα φλάντζης μακρά διάρκεια ζωής για το κόψιμο ή το κόψιμο ροής αερίου
Angle Valve , Pneumatic , CDQ-Jb160, Flange ISO-K/ CF , Leak rate ≤1.3×10-10 Pa.m3/s Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
Μικρές βαλβίδες γωνίας κενού με φτερούγες μη διαβρωτικών αερίων
Angle Valve , Manual , CD-Jb50KF, KF Flange , 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber),this
Επαγγελματική Πνευματική βαλβίδα κενού CF Φλάντζη συγκολλημένη
Angle Valve , Manual , CD-Jb16C , CF Flange , welded bellow sealed Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
Εγχειριώδης βαλβίδα κενού γωνίας CF Flange Μικρή διαρροή Οποιαδήποτε θέση στερέωσης
Angle Valve , Manual , CD-Jb25C , CF Flange , Mounting position : Any Model CD-J ultrahigh vacuum manual is used to cut-in or cut off the gas flow in the system. Manual valve is controlled by manually turning the handle to achieve the opening and closing of the valve. With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal(shaft seal of welded bellow), Small leakage ( internal welded Stainless steel Chamber)
Βιομηχανική βαλβίδα κενού Smc DN100 Φλάντζη ISO-K/CF Εργασιακό μέσο αέρα
Angle Valve , Pneumatic , CDQ-Jb100, Flange ISO-K/ CF , Application : 1E+5 Pa ～ 1.3E-7 Pa Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
Πνευματική φλάνσα βαλβίδας γωνίας κενού ISO-K/CF Δείκτης διαρροής ≤1,3×10-10 Pa.M3/S
Angle Valve , Pneumatic , CDQ-Jb63 , Flange ISO-K/ CF , Leak rate:≤1.3×10-10 Pa.m3/s Model CD-J ultrahigh vacuum angle valve is used to cut-in or cut off the gas flow in the system. Pneumatic valve is controlled by solenoid directional valve to change flow direction of cylinder movement to achieve the opening and closing of the valve.With the advantages: module design, compact structure, light weight, less mechanical wear, long service life, reliable seal (shaft seal of
